Technologyat the helm.
Proven marine technology for Egyptian boats, supplied, installed and serviced by our own team. We start with ZGYRO gyro stabilizers.
Our flagship:
ZGYRO.
We pick a small number of world-class marine brands and do them properly in Egypt: sizing, import, installation and local aftercare.
Electric gyro stabilizers that cut boat roll by up to 95%, at anchor, drifting or underway, with no hydraulics at all.
- Up to 95%roll reduction
- 24 modelsfor 6 m to 70 m boats
- 0hydraulics, oil or hoses
- 4 yearsor 2,000-hour warranty

Dive systems
Equipment for dive centres, liveaboards and divers across the Red Sea.
Onboard systems
More technology for the helm and the engine room, chosen with the same care as ZGYRO.
Systems,
not boxes.
Unlike traders who only import, we stand behind every system after it is fitted.
Supply
We size the right system from your hull data with the manufacturer, then import it and clear customs ourselves.
Install
Our team fits it in your marina or yard, following the factory method, and sea-trials it with you on board.
Service
Warranty, remote diagnostics and local visits, from the Red Sea to the North Coast.
Calm water, anywhere. Expert hands, close by.
EIBS 2027.
Stand S10.
See ZGYRO up close and talk to our engineers about your boat at the Egypt International Boat Show.
- EVENT
- Egypt International Boat Show
- DATES
- 14–17 January 2027
- STAND
- S10
The sea moves.You don’t.
Electric gyro stabilizers that eliminate up to 95% of boat roll — at anchor, drifting on the fish, or underway. Zero hydraulics. 24 models from 6 to 70 metres, fitted and serviced on Egyptian water.
One sealed unit.
Bolts low on the centreline — under a console, a berth or in the engine room. No fins, nothing outside the hull.
A gimbal inside.
The white ribbed flywheel housing hangs between two trunnion bearings, free to tilt fore and aft — that tilt is called precession.
Spinning mass.
Inside the housing, a flywheel spins about a vertical axis on precision ceramic bearings, storing the angular momentum that pushes back against every wave.
Tilt beats roll.
When the boat rolls, the spinning flywheel housing precesses fore and aft. That motion produces a torque equal and opposite to the roll — and the electric motor controls exactly how much.
Built to run all day.
A sea-water cooler keeps the drives at temperature; buffers cushion the end of each swing; controllers sit on the back plate; and a modular base frame makes refits straightforward.
Five figures that matter.
Throw a Red Sea swell at it.
Scroll the sea trial.
ZGYRO’s own trial, filmed over the bow. Watch the rail against the horizon: with the gyro off it swings, with it on the deck stays flat.
Size it to
your hull.
Drag to your boat’s length. The match comes straight from ZGYRO’s published catalogue.


5 m tenders to
53 m patrol ships.
Real ZGYRO installations from around the world. See every project →

21 m yacht
YACHT

18 m sportfisher
FISHING

50 m patrol vessel
GOVERNMENT

19 m charter
COMMERCIAL

9 m centre console
FISHING

Engine-room fit
REFIT

19 m pilot boat
COMMERCIAL

63 ft luxury yacht
YACHT

42 m offshore vessel
COMMERCIAL
No oil.
No leaks.
Conventional gyros steer their flywheel with hydraulics, and an oil leak can take the whole system down. ZGYRO does it with an electric motor.
Based on ZGYRO’s published product information. “Conventional gyro” means a gyro stabilizer whose precession is controlled hydraulically; individual products differ.
More time on the water. Less time holding on.
Sized from your hull data, imported and cleared by us, installed and sea-trialled in your marina, and backed by a 4-year / 2,000-hour warranty.
How a gyro
cancels roll.
No fins, no hydraulics, nothing outside the hull. Just a spinning mass, a precession axis and an electric motor that decides — hundreds of times a second — how hard to push back.
Watch it work.
The cut-away Z4 below sits in a rolling hull. Switch the gyro on and watch the drum precess fore and aft — and the roll fade away.
Store momentum
The flywheel spins about a vertical axis inside a vacuum-sealed drum. Mass × speed = angular momentum — up to 4,000 Nms in a Z4.
Tilt with the wave
As the hull rolls, the drum swings fore and aft on its trunnion bearings. Gyroscopic physics turns that swing into a torque at 90° — straight against the roll.
Meter the push
Motion sensors feed the controller, which drives the electric precession motor to brake or assist the swing — maximum torque, never past its safe angle.

Five parts.
No oil.
| Electric precession motor | Fully electric · zero hydraulics |
|---|---|
| Flywheel assembly | Precision ceramic bearings |
| Spin motor | Regenerates power at spool-down |
| Sea-water heat exchanger | Holds optimum temperature |
| Modular structural frame | Retrofit flexibility |
Triple buffer.
A spinning flywheel carries serious energy. ZGYRO limits the precession swing three independent ways.
Mechanical
Physical end-stops cushion the drum if it ever reaches the limit of its travel.
Electromagnetic
The motor itself generates braking torque that slows the swing smoothly before the stops.
Electronic
Control software watches angle and rate continuously and backs off torque long before the limits.
What you get.
24 models.
One for your hull.
From the 85 kg Z05 for 6 m tenders to the Z1000 for 70 m ships. Enter your boat’s length and we’ll highlight the match — our engineers confirm it from your hull data.
Specifications from the official ZGYRO catalogue. Displacement and length are guidance — final sizing depends on hull form, GM and roll period.
Every hull
that rolls.
Wherever people work, dive, fish or sleep on the water, roll is the problem. From Hurghada day boats to Red Sea liveaboards, here’s where a ZGYRO earns its place.
Proven
at sea.
A selection of ZGYRO installations worldwide — from 5 m tenders to 53 m government vessels. Egyptian installations will join this page as we deliver them.
Fitted here.
Looked after here.
Helmtek handles the whole job: sizing, import and customs, installation in your marina, sea trial and aftercare — one team, one point of contact.
Six steps.
Most installations are planned around a haul-out or a routine yard period, so you lose as little time on the water as possible.
Red Sea to
North Coast.
We work in the marinas where Egyptian boats live — and travel to yards wherever your boat is hauled out.
FAQ.
Will a gyro work at anchor and when drifting?
Yes — that is where gyros shine. Unlike fins, a gyro does not need boat speed, so it stabilises at anchor, on the drift while fishing and at low speed, as well as underway.
How long does it take to stabilize after switching on?
The flywheel needs to spool up first. Depending on the model it takes roughly 12 to 30 minutes to reach stabilizing speed — many owners switch on as they leave the berth.
What power does it need?
Small models run on 12/24 V DC; mid-size models on single-phase 220 V; larger units on three-phase 380 V. Operating power ranges from about 200 W on a Z05 to tens of kilowatts on the largest ships — each model page lists the figures.
Where is it installed?
Low and near the centreline is ideal — under a console, a berth, the cockpit sole or in the engine room. It is fully internal: nothing passes through the hull.
Why electric precession instead of hydraulic?
Hydraulic gyros use oil rams to control the flywheel’s swing; leaks and hydraulic servicing are a known weak point. ZGYRO’s electric precession motor removes pumps, hoses and oil entirely.
What warranty do I get?
ZGYRO stabilizers carry a 4-year or 2,000-hour warranty, supported locally by Helmtek Marine Systems, with most diagnostics handled remotely.
Helmtek.
Technology at the helm.
Helmtek Marine Systems brings proven marine technology to Egyptian boats and the people who run them. Gyro stabilizers come first, with ZGYRO. More partner brands will follow, chosen to make time on the water calmer, safer and more capable.
هيلمتك للأنظمة البحرية · التكنولوجيا على الدفّة
Two words,
one job.
The wheel, the command position: control of the boat.
The technology behind it. Together: the people who put the right technology at your helm.
“Marine Systems” means we supply, install and service complete systems, not boxes.
Owners, captains,
yards, dive operators.
For boats in Egypt and the Red Sea, Helmtek is the technical partner that brings world-class marine systems with local installation and service.
| Company | Helmtek Marine Systems |
|---|---|
| Flagship brand | ZGYRO (official distributor) |
| We cover | Red Sea · Suez · North Coast |
| Meet us | EIBS 2027 · Stand S10 |
Calm water, anywhere.
Expert hands, close by.
